Electrical Submersible Pump Esp for 190° C

Product Description:
It is a special pump for hot water from 50ºC to 260ºC.
The quality of hot water ususally be special and chanllenging.
There are different materials for different project.

The ESP Electric Submersible Pump System consists of several components that are carefully selected to create the most economical and efficient solution for each set of well conditions.

Wellhead (1) The wellhead provides structural and pressure containing interface for the drilling and production equipment.

Surface Equipment (2) Above ground a system controller combined with a Variable Frequency Drive and related transformer or the patented CAESP Variable Frequency Generator provide controlled power supply to the ESP.

Power Cable (3) Motor Lead Extension (9) The electrical main cable and the flat cable motor lead extension with pothead connect to the surface equipment with the ESP motor and well monitoring device.

Drain Valve (4) Check Valve (5) Other protective devices are located above the pump discharge. These include the check valve that closes on backflow and prevents back spinning and the drain valve that allows for pulling the ESP without a wet tubing string.

Pump (6) The pumping unit itself consists of the multi-stage centrifugal pump housed in a pressure sleeve with the capability of producing capacities up to 100,000 BPD (16,000 m3/d) from depths of up to 15,000 ft (4,575 m).

Intake/Gas Separator/Gas Kompressor (7) Immediately below the pump is the intake combined with a gas separator if required. The gas separator allows for trouble free operation in well conditions with free gas contents of more than 10% to 20%. The CAESP Gas Kompressor can handle up to 45% of free gas.

Protector (8) Located between the motor and pump intake is the protector. The protector isolates the motor from the well fluid and contains the high capacity thrust bearing.

Motor (10) The high quality electrical motor for well casings 4-1/2" (114 mm) and larger is a squirrel cage, two pole, three phase induction motor. The motor turns at a speed of approximately 3,500 RPM at 60 HZ and 2,900 RPM at 50 HZ.

Sensor (11) The down hole sensor is located below the motor and transmits important well and system data via the main power cable to the surface.Materials option:Motor Temperature Rating for Operating:Photo:

Company Information:
Aote Tianjin Pump Co., Ltd. was established in 2004,which is a professional manufacturer specialized in production, sales, R&D of ESP and Seawater Submersible Pump Units.
We have setted up 6 main sections for ESP manufacturing, including lamination stacking, stator winding, motor assembly, pump assembly, protector assembly and separator assembly, protector assembly and separator assembly. So far, the annual production capacity of AOTE has reached 1150 ESP units. 

Now we can produce 23 series and 550 specifications of ESP:
TM375,456,540,562,738series oil-submerged motors;
TPR338,400,513,675 series protector;
TS338,400,513 series gas separator;
TIN338,400,513,675 series intake;
TP338,400,513,675 oil-submerged pumps;

Our Seawater Submersible Pump Unit are in great need for the uses of offshore platform fire protection, water injection and cooling.
Customerization and OEM is acceptable.

Win-win cooperation is the foundation of our business. We listen to our customers' requirements and provide best solutions accordingly with minimized cost. Best quality, fast delivery, good after sale service are our core values
Contact us: